-為您提供專業的原子力顯微鏡整體解決方案

Shape | Tip Height | Tip Radius |
Standard | 10 - 15 μm* | < 25 nm |
Shape | Length | Width | Thickness | Force Const. | Res. Freq. |
Beam | 225 μm(220 - 230 μm)* | 28 μm(22.5 - 32.5 μm)* | 3 μm(2.5 - 3.5 μm)* | 2.8 N/m(1.2 - 5.5 N/m)* | 75 kHz(60 - 90 kHz)* |
* Typical range
PtIr5 Coating
The PtIr5 coating consists of a 23 nm thick platinum iridium5 layer deposited on both sides of the cantilever. The tip side coating enhances the conductivity of the tip and allows electrical contacts. The detector side coating enhances the reflectance of the laser beam by a factor of 2 and prevents light from interfering within the cantilever.
The coating process is optimized for stress compensation and wear resistance. Wear at the tip can occur if operating in contact-, friction- or force modulation mode. As the coating is almost stress-free the bending of the cantilever due to stress is less than 2 degrees.